We Infinite Leisure is the Swimming Pool Filter Suppliers in Dubai provides the swimming pool filter and below are the top brands in the UAE’s market.
KRIPSOL SAND FILTER WITH 6 WAYS VALVE 400MM – MODEL BL400C
KRIPSOL SAND FILTER WITH 6 WAYS VALVE 520MM – MODEL BL520C
KRIPSOL SAND FILTER WITH 6 WAYS VALVE 640MM(1 DAMAGE IN
KRIPSOL SAND FILTER WITH 6 WAYS VALVE 760MM – MODEL BL760C
KRIPSOL SAND FILTER WITH 6 WAYS VALVE 900MM (1 DAMAGE IN
KRIPSOL INDUSTRIAL FILTER – MODEL BL451200B
KRIPSOL INDUSTRIAL FILTER – MODEL BL341050B
KRIPSOL GRANADA FILTER – MODEL GL406D
KRIPSOL GRANADA FILTER – MODEL GL506D
KRIPSOL 6WAY VALVE 1.5″ – MODEL VK6E43B
KRIPSOL 6WAY VALVE FITTINGS FOR 1.5″ – MODEL RFD0130.00R
KRIPSOL 6WAY VALVE 2″ – MODEL VK6E3B
KRIPSOL 6WAY VALVE FITTINGS FOR 2″ – MODEL RFD0131.00R
KRIPSOL 6WAY VALVE 3″ THREADED – MODEL V693A
KRIPSOL FILTER LID WITH O’RING – MODEL RFD0101
KRIPSOL TANK CONNECTOR 1.5″ FOR BL FILTER – MODEL RFD0120.00R
KRIPSOL TANK CONNECTOR 2″ FOR BL FILTER – MODEL RFD0120.01R
Looking for Swimming Pool Filter Suppliers in Dubai? Call us now at 04 429 00 44.
METHOD FOR SWIMMING POOL SAND FILTER INSTALLATION.
INSTALLATION OF SAND FILTERS SYSTEMS
The swimming pool sand Filter has to be installed at their exact location as shown on approved shop drawings.
The selector valve or multiport valve is then correctly placed on the filter.
The multiport valve supports are then installed to support them along with the filter.
The multiport valves pipes inlet, return and backwash lines are then plumbed accordingly.
The plumbed connections are then supported to the base.
The minimum spacing requirement should adhere to i.e. 800 mm from the swimming pool and filter top to the roof and 250 mm between 2 filters.
Sand should be loaded once the swimming pool sand filter is installed into its exact location and during the testing stage. This forms the filtration media.
Gravel of at least 1 to 2 mm in size must be introduced first until the Sand filter’s Collector arms are covered ( approx 10 cm ). Then silica sand from 0.4 to 0.8 mm in size is introduced up to the maximum limit of filtration height.
The filter lid is then placed in the correct position and closed.
INSTALLATION OF CARTRIDGE FILTER
In order to correctly install the filter, it should be placed on a flat surface as close to the pump as possible, and if possible, below the level of water in the swimming pool, and protected from extreme weather conditions (frost.). It would be convenient to provide a drain close to the filter to facilitate emptying.
It is necessary to leave sufficient clearance around the pool filter (minimum 450mm). In order to have easy access to carry out the maintenance operations correctly. In addition, it is also used to fit valves before and after the pool filter so that it can be isolated for maintenance work.
In order to maximally avoid pressure loss in the piping, the filter should be installed as close as possible to the pool and if possible with piping of the same diameter as the filter connections.
The location is select for the filter installation as per approved shop drawing.
The metallic inserts are inserted in the filter base.
The channelled base in then mounted and bolted for the Cartridge to be mounted on top
The Cartridge filter is then fastened to the base.
The plumbing connections for the inlet and outlet are done.
Searching for Swimming Pool Filter Suppliers in Dubai? Call us now at 04 429 00 44.
MATERIAL REQUIREMENTS
Sand Filter with Multiport valve.
Sand and gravel for sand filter media.
Cartridge Filter. (For small water features)
COMMON TOOLS FOR INSTALLATION
The following tools are commonly used in general for installation of dosing systems
- Metal cutting saw
- Touch-up material
- Screwdriver
- Drill with bits
- File
- Open and wrench
- Nylon Cord
- Sealant for cut edges (Fiberglass)
- Cutting Saw (Fiberglass Carbide or Diamond Tipped
- Band torque Wrench
- Tape measure
- Square
- C-clamp
- Torque wrench
- Ratchet wrench
- Offset Bolt cutters (Wire mesh)
- Dust Mask (Fiberglass)
- Appropriate safety equipment